Knowing When to Call a Professional to Fix a Garage door

Many homeowners prefer than ever before are performing home improvement jobs themselves rather than spending high labor charges on professional services. Definitely, some jobs do not need the assistance of experts but there are others.

In the case of an overhead garage door, you can tackle most of the repairing jobs on your own.  But the challenging part is learning how to diagnose the problems, determining what you can do to fix them, and knowing when to call a professional contractor like Up & Over Garage Door Repair for help. In this article, you will find that there are many techniques that will help you to keep your garage door in a good working position without costing you a lot of money.

The garage door runs up and down on metal tracks with the help of torsion springs. The easiest preventative maintenance you can do is to regularly check them to be stable over the required point. Inspect the tracks thoroughly to find out the debris, dents, or other types of damages. Metal tracks need to be cleaned and lubricated occasionally in order to keep them working properly. Minor dents and dings can be straightened using a rubber or wooden hammer. If the tracks are seriously damaged, they need to be changed. In addition to this, you need to inspect all the screws and bolts which hold the tracks in place and they should be tightened properly if required.

Take a visual assessment of moving hardware of garage door. Is it hanging straight or does it appear to be dented? Check the tracks and hinges to make sure that they are aligned and balanced correctly. If tightening the screw does not work to adjust the hinges, it normally means that the screw holes have become enlarged which needs to be replaced with a larger screw. In case, the wood attached to the hinges has been worn away, any wood filler may or may not give you a solid and strong surface you need to reconnect them. But if this trick does not work, then it is time to call a professional garage door expert.

Torsion springs that operate the garage door can be extremely dangerous due to the high pressure imposed on them. If you have installed these types of springs, never try to fix or replace them yourself. In the case of extension springs, it is fine to tighten the screws and adjust the springs yourself, if you are familiar with the mechanism of the garage door.

There is plenty of websites that will provide you step-by-step directions for adjusting the springs. If you experience that this project is beyond your skills, call a professional garage door expert.

Most overhead garage doors are installed with an electric garage door opener. Definitely, you can perform routine maintenance services to make sure that it is tightened properly. If your opener is not functioning properly, the first thing to confirm that it is plugged in properly. If it is not you may need to fix it. You can also replace it on your own if you believe that you cannot fix it easily.